Tree Cutting Companies Waterfall

How To Do The Best Tree Cutting Techniques or Tree Cutting Companies ?

Cutting down a tree isn’t as simple as just whacking away at it with an ax. There are specific techniques that need to be followed in order to preserve the wood and ensure the safety of the people cutting down the tree. In order to predict how a tree will fall Tree Cutting Companies  in Rivonia, the cutter will need to determine the right type of cut to use. There are three main notch types that individuals can use during tree cutting. They are the open-faced notch, the conventional notch and the Humboldt notch.

Tree Trimmers Costs

The Open-Faced Notch

The open-faced notch is ideal for trees that require a high level of accuracy. If the individual is cutting in a tight spot, where accuracy is extremely important, the open-faced notch is the safest notch to use. In this notch, a large, sideways V is cut into the side of the tree. It is a heavily angled notch. The first cut goes in a downwards motion of at least 70 degrees. The bottom cut goes in at a 20 degree upward angle. Then, a small horizontal cut will be made on the back of the tree, meeting the point in the V. The only downside to this notch, other than the additional time required, is the cutter will need to remove the hinge, so there will be a small amount of wood lost.

Tree Cutting Price

The Conventional Notch

The conventional notch is named that way because it is the most common type of notch used. It is the preferred method among loggers and tree removal specialists because it is fast and safe at the same time. It still allows a certain amount of accuracy, though not as much as the open-faced notch. In this notch, the top cut goes in at an angle, while the bottom cut is horizontal.

Tree Trimming Companies Prices

The Humboldt Notch

The Humboldt notch is another common notch when cutting trees. In this notch, the top cut is made horizontal, while the bottom goes in at an upward angle. In this notch, the kickback over the stump might be larger, so it is not ideal for leaning trees. However, this notch does save a lot of wood, so when the tree is being cut for the purpose of using the wood, then the Humboldt notch is a good choice to make.

In tree cutting, it is important to fully evaluate the type of cut prior to getting started. In all cases, the safest possible cut should be used for the purpose of getting the tree down safely and accurately. For most individuals, this will mean using the open-faced cut in order to get the tree down. However, the individual will need to consider the way the tree is leaning, the health of the overall tree, the obstacles in the tree’s way and the size of the tree. In most cases, it is best to cut the tree in a way that goes along with the natural way the tree leans. This isn’t always possible. In cases, where the tree is leaning in a way that it can’t be allowed to fall, non professionals should consult with a tree removal service in order to make sure the tree cutting is carried out as safely as possible.

Interesting Facts About Tree Cutting Companies in Hyde Park:

About Tree Cutting Companies in Hyde Park:

Tree Trimming Cost

INTRODUCTION

Echo systems around the world help sustain life for millions of species. Echo systems that are mainly forests provide a home for a large majority of the species alive. Therefore the trees in these forests are considered to be the most important species. Although it is true, that most species are not able to sustain without each other.

There are many benefits that we get from our forests. Some of these include cleaner drinking water, a home for plants and animals, economic growth, clean air, recreational opportunities, reassuring future. Another benefit we get from trees is called oxygen. If there were no trees to give us oxygen to breath, we would not be able to live. So if you need one good reason why a forest should exist, staying alive is a pretty good reason.

CAUSES OF THE PROBLEM

Forests have many resources that people can use to raise their living standards. One example is the wood for building houses. Certain wood materials last a long time, they keep the house warm and make it easy to manufacture homes. Unfortunately the world is overpopulating and the demand for a higher standard of living is constantly on the rise. Therefore the demand for more resources is growing to levels that cannot be sustained. Since forests provide a large portion of the world's resources, many forests are cut down or burned.

The cause for cutting down forests is directly associated with the high demand for wood to manufacture paper products and lumber for other manufacturing. We practically use wood for everything. It is used in home building, marine products, furniture and the list seems like it's endless. Just look around yourself right now and chances are you will find a product within your reach that is made of wood. Not only is wood a good building material, but it also has great aesthetic qualities. Most people appreciate a nice wooden dining table set or classic wooden rails on a staircase. Unfortunately we don't always take in to account how many trees need to be cut down so we can have these luxuries in our lives.

Another major direct cause for forest depletion is simply burning forests for farmland. This is more common with countries that are undeveloped and have tropical rainforests. Many poor farmers in these countries burn or cut small portions of tropical forests so they can have room for farming and cattle. But the big scale problem is created when huge corporate farms burn thousands of square acres a year. They need this much room so they can provide farming on a much larger scale to compete in the world market for food. The reason forests are burned for the farmland is due to the rich minerals fertility of the soil.

Unfortunately even the large scale farmers in undeveloped countries are not educated on how they can maximize their results when reusing the soil. Therefore the soil is used up and left as a desert while the farmers burn more forest to make another farm. The Amazon rainforest which is the largest in the world has fallen victim to such deforestations. This forest is located in South America where countries are having tough financial times. Brazil's market is a third of all the Latin countries included. Yet "Brazil's foreign debt, except in the most implausible of positive economic circumstances, is simply unsustainable in the years ahead" (CRF.org 2002). Economical pressure on a country is another big cause that will force a country to deforestation such as the case in Brazil. Basic Science and Remote Sensing Initiative (BSRSI) show data that between 1978 to 1988 230,000 square miles, nearly the size of Texas was affected by deforestation (bsrsi.msu.edu). That is 16.5% of the whole rainforest in the Amazon.

Implement more efficient farming methods to encourage the reuse of land.

Educate people around the world about the negative impacts of deforestation, and what can be done to prevent it. Help finance more educational programs. Help countries make the right economic decisions.

Sign international treaties and make laws/regulations to control annual deforestation.

Import meat and dairy products from markets that do not cause deforestation.

The solution that I believe will be very effective is the second one. As far as cutting down trees, this is a very workable solution. We have too many products that are made of wood today. As economies grow around the world, the middle class will also grow. This middle class will demand more and more products that are made of wood. The American middle class is obsessed with wood products and we don't even realize it. A large portion of our homes are built from wood, and so is our furniture. Most cabinets alone require so much wood. If we like wood products so will the rest of the world.

The solution is to take the majority of the wood products and find alternative materials to them. This of course is not as easy as it sounds, but it is very doable. Once it is done, it will extremely decrease the demand for wood, therefore reducing deforestation. With such high advances in technology we can travel in space and replace hearts. Therefore it is possible to make materials that are safe for the environment and replace wood. Maybe even make materials that share most of the properties that wood has. We can even invent materials that imitate wood like the "burled wood" in our cars today. This "burled wood" in most cars isn't even wood anymore, it is some kind of a plastic and a pattern to imitate the look of the wood. Speaking of the auto industry, I can't believe how advanced our cars have become. These are cars that we drive everyday. Yet we live in new houses that were built with an ancient method of wood and nails. I think that is ridiculous. Perhaps the solution to replace wood with alternative materials will also lead to more efficient assembly methods and a safer environment. And most importantly the first solution is changing our attitude to help prevent deforestation.

The Depletion of Forest Resources is a huge problem with challenging solutions, let us work as a team around the world to help solve these issues.

Tree Cutting Companies in Hyde Park

Stump Removal Company Price

If we really care about the CO2 in the atmosphere then we need to cut down less trees and re-plant those we have already taken out, then plant another 6 Billion more, yes that is a Billion with a "B". Land Clearing, deforestation and other issues is a huge calamity.

Of we read Jared; "Collapse" one thing he mentioned in his book was; "Wonder what the inhabitants of Easter Island were thinking when they cut down the last tree?" And today in Bangladesh, we know. On the Olympia Peninsula in Washington state, and along the OR, CA coastlines, lots of clear cutting and Checkerboard cutting in Canada for the last US Housing Boom.

We need to be thinking here that is if we are really interested in Global Warming and the future? I certainly hope this article is of interest and that is has propelled thought. The goal is simple; to help you in your quest to be the best in 2007. I thank you for reading my many articles on diverse subjects, which interest you.

Why Prune a Tree, Especially in the Winter?

Stump Removal Price

While trees are important parts of the environment and chopping them down wholesale is bad, there are some situations that just necessitate cutting them down. A tree that had been planted in the wrong spot could end up as an unwanted obstruction, or one that had been diseased may need to be brought down. One may opt to hire an expert to do the work, or to save money, they may decide to do it themselves. In the case of the latter, one should know how to cut down a tree safely and efficiently.

As the phrase goes, safety comes first. If one wants to know how to cut down a tree, it is important to consider that this is an arduous and potentially hazardous task. So leather work gloves and safety goggles are necessary for proper protection. As for the equipment needed for the job, a chainsaw and a pruning saw would do just fine. Of course, one should also bring an orchard ladder and some rope.

Tree-cutting really is a job best left to professionals, especially in the case of really high, larger trees. But if the tree in question is deemed manageable and if one is confident that they can easily grasp how to cut down a tree, one should then remember the materials needed for the task. Sharp saws, a sturdy ladder and proper safety gear are of course a given. But one should never forget two other simple but necessary tools for the task: caution and patience.

Tree Felling Companies Price