A Weed Whacker has various names: String Trimmer, Garden String Trimmer, Tree Pruner, Brush Cutter, Weed Eater, etc. As other articles have aptly pointed out, Stump Removal Service in Centurion these versatile garden tools come with various cc-power levels, electric versus gasoline, and 2-stroke versus 4-stroke capabilities. But what has not been addressed is the use of a “BLADE” on such a tool for all the versatile work a blade can perform in the garden environment.
ADDED VERSATILITY AND USES WITH A BLADE:
1. Tree trimming (aka Pruning) which in many cases actually works better than using a cumbersome heavy chain saw for pruning since the circular blade can be wielded at the end of a lighter longer 6 foot Weed Whacker shaft for reaching up into trees. Easy Stump Removal Such a blade can typically cut a tree branch/ limb up to the diameter of the blade provided you cut from both sides of the limb.
BLADE HARDWARE, ARBOR HOLE MATCHING:
Each Weed Whacker on the market is different and so each owner of their particular Weed Whacker will have to contact their respective Weed Whacker Manufacturer to inquire about BLADE attachment hardware. Most electric-powered versions are UNDER powered for handling a Blade so will probably NOT have blade attachment hardware available. On the other hand, most gasoline powered Weed Whacker’s will have Blade attachment hardware available. Blade attachment hardware normally consists of a standard blade guard along with a few small metal parts that fit on (slide onto) the little threaded shaft that the String Spool screws onto. These little pieces of hardware will consist of the lower part that will have a raised circle about the size of a common 25 cent piece (quarter) or as small as a nickel (5 cent piece). Tree Cutting Service this raised circle is how the hole in the center of the Blade fits on, then the upper part hardware piece variously called “the cap piece” is applied on the top of the blade, then a nut that is screwed on top of the cap, followed by a cotter pin.
After You Cut That Tree Down Now What?
Stump Removal Service in Centurion ?
Cutting down a tree isn't as simple as just whacking away at it with an ax. There are specific techniques that need to be followed in order to preserve the wood and ensure the safety of the people cutting down the tree. In order to predict how a tree will fall, the cutter will need to determine the right type of cut to use. There are three main notch types that individuals can use during tree cutting. They are the open-faced notch, the conventional notch and the Humboldt notch.
The Open-Faced Notch
The open-faced notch is ideal for trees that require a high level of accuracy. If the individual is cutting in a tight spot, where accuracy is extremely important, the open-faced notch is the safest notch to use. In this notch, a large, sideways V is cut into the side of the tree. It is a heavily angled notch. The first cut goes in a downwards motion of at least 70 degrees. The bottom cut goes in at a 20 degree upward angle. Then, a small horizontal cut will be made on the back of the tree, meeting the point in the V. The only downside to this notch, other than the additional time required, is the cutter will need to remove the hinge, so there will be a small amount of wood lost.
The Conventional Notch
The conventional notch is named that way because it is the most common type of notch used. It is the preferred method among loggers and tree removal specialists because it is fast and safe at the same time. It still allows a certain amount of accuracy, though not as much as the open-faced notch. In this notch, the top cut goes in at an angle, while the bottom cut is horizontal.
The Humboldt Notch
The Humboldt notch is another common notch when cutting trees. In this notch, the top cut is made horizontal, while the bottom goes in at an upward angle. In this notch, the kickback over the stump might be larger, so it is not ideal for leaning trees. However, this notch does save a lot of wood, so when the tree is being cut for the purpose of using the wood, then the Humboldt notch is a good choice to make.
In tree cutting, it is important to fully evaluate the type of cut prior to getting started. In all cases, the safest possible cut should be used for the purpose of getting the tree down safely and accurately. For most individuals, this will mean using the open-faced cut in order to get the tree down. However, the individual will need to consider the way the tree is leaning, the health of the overall tree, the obstacles in the tree's way and the size of the tree. In most cases, it is best to cut the tree in a way that goes along with the natural way the tree leans. This isn't always possible. In cases, where the tree is leaning in a way that it can't be allowed to fall, non professionals should consult with a tree removal service in order to make sure the tree cutting is carried out as safely as possible.
Tree Trimming - Do It Yourself
Here's what you need to know about successful DIY tree-trimming: